Product Details
Unistrut P6000 is commonly used for trapeze supports, seismic bracing, ceiling grids, pipe, conduit, duct and cable tray supports, rack, and other general framing. For application examples, refer to our Application Showcase. Product dimensions are 13/16" wide x 13/16" tall x 19 ga. thick, solid. Punched holes are also available for ease of installation. Our P6000 is available in the following finishes: Pre-Galvanized (PG), Hot-Dip Galvanized (HG), Plain (PL), Green (GR), Stainless Steel (SS) and Aluminum (EA).
Unistrut Buffalo is a division of Eberl Iron Works, Inc.
MATERIAL
Channels are accurately and carefully cold formed to size from low-carbon strip …
Product Details
Unistrut P6000 is commonly used for trapeze supports, seismic bracing, ceiling grids, pipe, conduit, duct and cable tray supports, rack, and other general framing. For application examples, refer to our Application Showcase. Product dimensions are 13/16" wide x 13/16" tall x 19 ga. thick, solid. Punched holes are also available for ease of installation. Our P6000 is available in the following finishes: Pre-Galvanized (PG), Hot-Dip Galvanized (HG), Plain (PL), Green (GR), Stainless Steel (SS) and Aluminum (EA).
Unistrut Buffalo is a division of Eberl Iron Works, Inc.
MATERIAL
Channels are accurately and carefully cold formed to size from low-carbon strip steel.
**STEEL: PLAIN **19 Gauge (1.0 mm) ASTM A1008
**STEEL: PRE-GALVANIZED **19 Gauge (1.0 mm) ASTM A653 GR 33
All nuts are manufactured from mild steel bars conforming to ASTM A1011 SS Grade 33. Fittings are made from hot rolled, pickled and oiled steel plate or strip and conform to ASTM A1011 SS GR 33.
FINISHES
Channels are available in: Perma-Green III (GR), electro-galvanized (EG), Pre-galvanized (PG), conforming to ASTM A653 GR 33 and plain (PL).
*** Perma Green finish is a commercial grade finish, and as such scuffs and scratch marks are to be expected. If a flawless finish is desired, it is recommended to apply a matching touch up paint ***
Nuts are available in plain or electro-galvanized (EG) finish.
Fittings are available in Perma-Green III, electrogalvanized (EG) with zinc electrolytically to commercial standards ASTM B653-G90 Type III SC1; or plain (PL).
STANDARD LENGTHS
P-6000 – 16 Feet (4.88m) P-7000 – 10 Feet (3.05m)
Tolerances are +1⁄8" (3.2 mm) to +1⁄2" (12.7 mm) to allow for cutting. Special lengths are available for a small cutting charge with a tolerance of ±1⁄8" (3.2mm).
APPLICATION
A unique half-size reduction of the 15⁄8" channel width series, this smaller channel size can be used to carry light loads economically in applications such as instrumentation, retail displays and light-duty laboratory supports. It also provides the flexibility found in all Unistrut® framing systems.
DESIGN BOLT TORQUE
| Bolt Size | 1/4"-20 | Rec. Torque Ft/Lbs (N•m) | 6 (8) | Max Torque Ft/Lbs (N•m) | 7 (9) |
** DIMENSIONS**
Imperial dimensions are illustrated in inches. Metric dimensions are shown in parenthesis or as noted. Unless noted, all metric dimensions are in millimeters and rounded to one decimal place.
LOAD DATA
All beam and column load data pertains to carbon steel and stainless steel channels. Load tables and charts are constructed to be in accordance with the SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS 2007 EDITION published by the AMERICAN IRON AND STEEL INSTITUTE USING ASD METHOD. Loads are based on 33 ksi steel cold formed to 42 ksi.
| Type of Load | Safety Factor to Yield Strength | Safety Factor to Ultimate Strength |
| Beam Loads | 1.67 | 2.0 |
| Column Loads | 1.80 | 2.2 |