Djot

Djot is a light markup syntax. It derives most of its features from commonmark, but it fixes a few things that make commonmark’s syntax complex and difficult to parse efficiently. It is also much fuller-featured than commonmark, with support for definition lists, footnotes, tables, several new kinds of inline formatting (insert, delete, highlight, superscript, subscript), math, smart punctuation, attributes that can be applied to any element, and generic containers for block-level, inline-level, and raw content.

The project began as an attempt to implement some of the ideas I suggested in my essay Beyond Markdown. (See Rationale, below.)

This repository contains a Syntax Description, a Cheatsheet, and a Quick Start for Markdown Users that outlines the main differences between djot and Markdown.

You can try djot on the djot playground without installing anything locally.

Rationale

Here are some design goals:

It should be possible to parse djot markup in linear time, with no backtracking. 1.

Parsing of inline elements should be "local" and not depend on what references are defined later. This is not the case in commonmark: [foo][bar] might be "[foo]" followed by a link with text "bar", or "[foo][bar]", or a link with text "foo", or a link with text "foo" followed by "[bar]", depending on whether the references [foo] and [bar] are defined elsewhere (perhaps later) in the document. This non-locality makes accurate syntax highlighting nearly impossible. 1.

Rules for emphasis should be simpler. The fact that doubled characters are used for strong emphasis in commonmark leads to many potential ambiguities, which are resolved by a daunting list of 17 rules. It is hard to form a good mental model of these rules. Most of the time they interpret things the way a human would most naturally interpret them—but not always. 1.

Expressive blind spots should be avoided. In commonmark, you’re out of luck if you want to produce the HTML a<em>?</em>b, because the flanking rules classify the first asterisk in a*?*b as right-flanking. There is a way around this, but it’s ugly (using a numerical entity instead of a). In djot there should not be expressive blind spots of this kind. 1.

Rules for what content belongs to a list item should be simple. In commonmark, content under a list item must be indented as far as the first non-space content after the list marker (or five spaces after the marker, in case the list item begins with indented code). Many people get confused when their indented content is not indented far enough and does not get included in the list item. 1.

Parsers should not be forced to recognize unicode character classes, HTML tags, or entities, or perform unicode case folding. That adds a lot of complexity. 1.

The syntax should be friendly to hard-wrapping: hard-wrapping a paragraph should not lead to different interpretations, e.g. when a number followed by a period ends up at the beginning of a line. (I anticipate that many will ask, why hard-wrap at all? Answer: so that your document is readable just as it is, without conversion to HTML and without special editor modes that soft-wrap long lines. Remember that source readability was one of the prime goals of Markdown and Commonmark.) 1.

The syntax should compose uniformly, in the following sense: if a sequence of lines has a certain meaning outside a list item or block quote, it should have the same meaning inside it. This principle is articulated in the commonmark spec, but the spec doesn’t completely abide by it (see commonmark/commonmark-spec#634). 1.

It should be possible to attach arbitrary attributes to any element. 1.

There should be generic containers for text, inline content, and block-level content, to which arbitrary attributes can be applied. This allows for extensibility using AST transformations. 1.

The syntax should be kept as simple as possible, consistent with these goals. Thus, for example, we don’t need two different styles of headings or code blocks.

These goals motivated the following decisions:

Block-level elements can’t interrupt paragraphs (or headings), because of goal 7. So in djot the following is a single paragraph, not (as commonmark sees it) a paragraph followed by an ordered list followed by a block quote followed by a section heading:

My favorite number is probably the number
1. It's the smallest natural number that is
> 0. With pencils, though, I prefer a
# 2.

Commonmark does make some concessions to goal 7, by forbidding lists beginning with markers other than 1. to interrupt paragraphs. But this is a compromise and a sacrifice of regularity and predictability in the syntax. Better just to have a general rule.

An implication of the last decision is that, although "tight" lists are still possible (without blank lines between items), a sublist must always be preceded by a blank line. Thus, instead of

- Fruits
- apple
- orange

you must write

- Fruits

- apple
- orange

(This blank line doesn’t count against "tightness.") reStructuredText makes the same design decision.

Also to promote goal 7, we allow headings to "lazily" span multiple lines:

## My excessively long section heading is too
long to fit on one line.

While we’re at it, we’ll simplify by removing setext-style (underlined) headings. We don’t really need two heading syntaxes (goal 11).

To meet goal 5, we have a very simple rule: anything that is indented beyond the start of the list marker belongs in the list item.

1. list item

> block quote inside item 1

2. second item

In commonmark, this would be parsed as two separate lists with a block quote between them, because the block quote is not indented far enough. What kept us from using this simple rule in commonmark was indented code blocks. If list items are going to contain an indented code block, we need to know at what column to start counting the indentation, so we fixed on the column that makes the list look best (the first column of non-space content after the marker):

1.  A commonmark list item with an indented code block in it.

code!

In djot, we just get rid of indented code blocks. Most people prefer fenced code blocks anyway, and we don’t need two different ways of writing code blocks (goal 11).

To meet goal 6 and to avoid the complex rules commonmark adopted for handling raw HTML, we simply do not allow raw HTML, except in explicitly marked contexts, e.g. \`{=html}` or

``` =html
<table>
<tr><td>foo</td></tr>
</table>

Unlike Markdown, djot is not HTML-centric\. Djot documents might be rendered to a variety of different formats, so although we want to provide the flexibility to include raw content in any output format, there is no reason to privilege HTML\. For similar reasons we do not interpret HTML entities, as commonmark does\.
-

To meet goal 2, we make reference link parsing local\. Anything that looks like `[foo][bar]` or `[foo][]` gets treated as a reference link, regardless of whether `[foo]` is defined later in the document\. A corollary is that we must get rid of shortcut link syntax, with just a single bracket pair, `[like this]`\. It must always be clear what is a link without needing to know the surrounding context\.
-

In support of goal 6, reference links are no longer case-insensitive\. Supporting this beyond an ASCII context would require building in unicode case folding to every implementation, and it doesn't seem necessary\.
-

A space or newline is required after `>` in block quotes, to avoid the violations of the principle of uniformity noted in goal 8:

-

To meet goal 3, we avoid using doubled characters for strong emphasis\. Instead, we use `_` for emphasis and `*` for strong emphasis\. Emphasis can begin with one of these characters, as long as it is not followed by a space, and will end when a similar character is encountered, as long as it is not preceded by a space and some different characters have occurred in between\. In the case of overlap, the first one to be closed takes precedence\. \(This simple rule also avoids the need we had in commonmark to determine unicode character classes---goal 6\.\)
-

Taken just by itself, this last change would introduce a number of expressive blind spots\. For example, given the simple rule,

parses as

rather than

If you want the latter interpretation, djot allows you to use the syntax

The `{_` is a `_` that can only open emphasis, and the `_}` is a `_` that can only close emphasis\. The same can be done with `*` or any other inline formatting marker that is ambiguous between an opener and closer\. These curly braces are *required* for certain inline markup, e\.g\. `{=highlighting=}`, `{+insert+}`, and `{-delete-}`, since the characters `=`, `+`, and `-` are found often in ordinary text\.
-

In support of goal 1, code span parsing does not backtrack\. So if you open a code span and don't close it, it extends to the end of the paragraph\. That is similar to the way fenced code blocks work in commonmark\.

-

In support of goal 9, a generic attribute syntax is introduced\. Attributes can be attached to any block-level element by putting them on the line before it, and to any inline-level element by putting them directly after it\.

-

Since we are going to have generic attributes, we no longer support quoted titles in links\. One can add a title attribute if needed, but this isn't very common, so we don't need a special syntax for it:

Link text{title=“Click me!”}

-

Fenced divs and bracketed spans are introduced in order to allow attributes to be attached to arbitrary sequences of block-level or inline-level elements\. For example,

{#warning .sidebar}

:: Warning This is a warning. Here is a word in [français]{lang=fr}.

::

## Syntax

For a full syntax reference, see the [syntax description](https://htmlpreview.github.io/?https://github.com/jgm/djot/blob/master/doc/syntax.html)\.

A vim syntax highlighting definition for djot is provided in `editors/vim/`\.

## Implementations

There are currently seven djot implementations:

- [djot\.js \(JavaScript/TypeScript\)](https://github.com/jgm/djot.js)
- [djot\.lua \(Lua\)](https://github.com/jgm/djot.lua)
- [djota \(Prolog\)](https://github.com/aarroyoc/djota)
- [djot-php \(PHP\)](https://github.com/php-collective/djot-php) along with a [wordpress plugin](https://github.com/php-collective/wp-djot)
- [jotdown \(Rust\)](https://github.com/hellux/jotdown)
- [godjot \(Go\)](https://github.com/sivukhin/godjot)
- [djoths \(Haskell\)](https://github.com/jgm/djoths)

[Here](https://github.com/dcampbell24/djot-implementations) are some benchmarks of these implementations\.

djot\.lua was the original reference implementation, but current development is focused on djot\.js, and it is possible that djot\.lua will not be kept up to date with the latest syntax changes\.

## Tooling

- [Vim](https://github.com/jgm/djot/blob/main/editors/vim) tooling is in this repository
- [Emacs](https://github.com/jgm/djot/blob/main/editors/emacs) tooling is in this repository and requires the tree-sitter grammar
- [Helix](https://github.com/helix-editor/helix) has built-in syntax highlighting
- Visual Studio Code

- [djot-vscode](https://github.com/ryanabx/djot-vscode)
- [Djot-Marker](https://github.com/wisim3000/Djot-Marker)
- [JetBrains IDEs](https://github.com/php-collective/djot-intellij) \(PhpStorm, IntelliJ IDEA, WebStorm, etc\.\)
- [Treesitter grammar](https://github.com/treeman/tree-sitter-djot)
- [Djockey](https://steveasleep.com/djockey/) is a static site generator for technical writing and project documentation\.

## File extension

The extensions `.djot` or `.dj` may be used to indicate that the contents of a file are djot-formatted text\.

## MIME type

There is no official MIME type, but `text/x-djot` may be used\.

## License

The code and documentation are released under the MIT license\.