by Aubrey Sambor published on Dec 07, 2025

Skip to comments

The Invoker Commands API adds new attributes to the <button> element to control interactive elements on the page such as popovers and modal dialogs without having to write JavaScript. Dialogs have been available in all modern browsers since March 2022, and the Popover API is available in all modern browsers as of January 2025.

Until now, users wanting to implement the <dialog> element needed to write their own JavaScript to power the show and hide functionality using the HTMLDialogElement interface, while the Popover API and Invoker Commands API for popovers work identically by using HTMLElement attributes to show, hide, or toggle the popover.

Why should you use this new API, and what benefits does it bring?

Dialogs vs Popovers

First, let’s go over the difference between a dialog and a popover. Hidde de Vries wrote a blog post in 2022 detailing the differences, but in short:

• Dialogs usually contain an action to take, such as agreeing to text or choosing an option. Popovers usually display short-lived information such as a date picker or toast notification.
• By default, dialog must be explicitly closed, either by taking an action within the dialog or closing via a close button. A popover can be lightly dismissed by clicking outside of the popover.
• A dialog can either be modal or non-modal, while a popover is always non-modal by design. As of late 2025 the Invoker Commands API only has a built-in command for a modal dialog, so I will be focusing on modal dialogs only in this post.
• Dialogs have a built in backdrop functionality to tint the background a different color, while popovers shouldn’t use a backdrop in most cases.
• A dialog is an HTML element with a role of dialog, while a popover is considered an attribute and needs a role to be added depending on the popover’s context. See Hidde de Vrie’s post on popover semantics to learn more about potential roles to add to your popover!

The command and commandfor attributes

The Invoker Commands API introduces two new attributes to the <button> element—command and commandfor. The commandfor attribute acts as a connector between the <button> controlling the functionality and the element that the command acts upon, while command contains the action that should be taken on the element.

As of late 2025 the following commands are supported within the API, which right now can only be used for <dialog> or <div role="dialog"> elements or on elements with the popover attribute. These commands are:

• show-modal: Shows a <dialog> element as a modal. If you’re familiar with the underlying API to show a <dialog> as a modal, this is equivalent to the HTMLDialogElement.showModal() method.
• close: Closes a <dialog> element. This is equivalent to the HTMLDialogElement.close() method.
• request-close: This command works similarly to the close command, but before the <dialog> can be closed, a cancel event is triggered first to cancel the closure of the dialog if required actions do not occur, such as selecting required options within the <dialog>. This is equivalent to the HTMLDialogElement.requestClose() method. This concept is a little tricky, so I’ll show an example later in the post.
• show-popover: Shows a popover element. This is equivalent to both the popoveraction="show" attribute and the HTMLElement.showPopover() method.
• hide-popover: Hides a popover element. This is equivalent to both the popoveraction="hide" attribute and the HTMLElement.hidePopover() method.
• toggle-popover: Toggles a popover element; if the popover is hidden, it will be shown, and if the popover is shown, it will be hidden. This is equivalent to both the popoveraction="toggle" attribute and the HTMLElement.togglePopover() method.
• Custom values: This is where The Invoker API really shines! A user can provide a custom value, prefixed by two hyphens (--) to create a custom command event. This event is usually written in JavaScript and provided by the user to add new functionality. The possibilities are endless!

Examples

The Invoker Commands API with a <dialog> element

This is a basic example of how to use the Invoker Commands API with a <dialog> element. One button fires the show-modal command when it is clicked, and within the <dialog>, another button fires the close command to close the dialog. No JavaScript necessary, it’s all built in for you!

<button commandfor="my-fancy-dialog" command="show-modal">Open dialog</button><dialog id="my-fancy-dialog">  <p>Dialog content</p>  <button commandfor="my-fancy-dialog" command="close">Close dialog</button></dialog>

The request-close command on a <dialog> element

To use the request-close command, a bit of JavaScript is needed. First, use the same code as above, but change the command on the button inside the <dialog> from close to request-close:

<button commandfor="my-fancy-dialog" command="show-modal">Open dialog</button><dialog id="my-fancy-dialog">  <p>Dialog content</p>  <button commandfor="my-fancy-dialog" command="request-close">Close dialog</button></dialog>

Now, since a cancel event is fired on the <dialog> element (as that’s the element that can be closed), an event listener needs to be added to capture the cancel event when request-close is called. In this example, an alert displays when the close button is clicked, and then, when the user clicks ‘OK’, the alert closes and then the dialog closes. This causes the user to have to perform an action before the dialog is closed.

const myFancyDialog = document.getElementById("my-fancy-dialog");myFancyDialog.addEventListener("cancel", (event) => {  window.alert(    "A cancel event gets fired when using the 'request-close' command."  );});

The Invoker Commands API with the popover attribute

Commands for the popover attribute also exist in the Invoker Commands API. The new show-popover, hide-popover, and toggle-popover commands are equivalent to the show, hide, and toggle values on the popovertargetaction attribute in the Popover API. The popover attribute still needs to be added to the popover’s container, but the Invoker Commands API handles the rest of the popover’s functionality.

<button commandfor="mycommandpopover" command="toggle-popover">Toggle popover</button><div id="mycommandpopover" popover>Popover content</div>

The Invoker Commands API with a custom command

This is where the Invoker Commands API gets fun! You can add your own custom commands if the command you wish to run does not exist. Since a mechanism for opening and closing <details> elements does not yet exist as a command, I wrote a custom --toggle-details command to open and close the <details> element when the <button> element is clicked.

<button class="my-fancy-button" commandfor="my-fancy-details" command="--toggle-details">Open details element</button><details id="my-fancy-details">  <summary>This is a details element</summary>  <p>Here is the text inside the details element, opened by a custom command!</p></details>

const detailsElement = document.querySelector("details");detailsElement.addEventListener("command", (event) => {  if (event.command === "--toggle-details") {    detailsElement.open = !detailsElement.open;  }});

Looking ahead

The Invoker Commands API is not widely supported across all modern browsers just yet—as of late 2025, the Invoker Commands API is available in Chrome and Edge as of version 135, Opera as of version 120, Firefox as of version 144, and Safari Technology Preview. However, if older browsers need to be supported, you’re in luck as there’s a polyfill created by the API author.

To learn what’s coming next for the Invoker Commands API, the authors have created an explainer document with potential future enhancements to the API, including commands to open, close, or toggle a <details> element, a command to open a native HTML date picker, and commands to play, pause, and mute HTML <audio> and <video> elements. Users can also submit an issue to add other commands that are not yet implemented—go forth and add your ideas!

Further reading

• Can native web APIs replace custom components in 2025?
• Introducing command and commandfor
• command and commandfor: the Invoker Commands API
• Going JavaScript-free with the new Invoker Command API!

About Aubrey Sambor

Aubrey Sambor is a front-end developer and accessibility advocate. She’s one of the organizers of A11yTalks, a monthly virtual meetup featuring speakers and conversations around digital accessibility. She loves CSS, fountain pens, knitting, coffee, and sushi.

Aubrey’s website: aubreysambor.com Aubrey on Mastodon: @starshaped@labyrinth.social

More articles

1. Previous day (6)Accessible by Design: The Role of the ‘lang’ Attribute
2. Next day 8What’s wrong with this HTML, and is it valid?