Product information "FPGA Module with AMD Artix™ 7A200T-2C, 1 GByte DDR3L, 4 x 5 cm, low profile"
The predecessor of this article is TE0712-02-82C36-L. All changes are in the Product Change Notification (PCN).
This module is identical to variant TE0712-03-82C36-A except the lower 2.5 mm Samtec connectors.
The Trenz Electronic TE0712-03-82C36-L is an industrial-grade FPGA module integrating a AMD Artix™ 7 200T FPGA, 1 GByte of DDR3 SDRAM, 32 MByte Flash memory for configuration and operation, a 10/100 Mbit Ethernet transceiver, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O’s is provided via rugged high-speed stacking st…
Product information "FPGA Module with AMD Artix™ 7A200T-2C, 1 GByte DDR3L, 4 x 5 cm, low profile"
The predecessor of this article is TE0712-02-82C36-L. All changes are in the Product Change Notification (PCN).
This module is identical to variant TE0712-03-82C36-A except the lower 2.5 mm Samtec connectors.
The Trenz Electronic TE0712-03-82C36-L is an industrial-grade FPGA module integrating a AMD Artix™ 7 200T FPGA, 1 GByte of DDR3 SDRAM, 32 MByte Flash memory for configuration and operation, a 10/100 Mbit Ethernet transceiver, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O’s is provided via rugged high-speed stacking strips.
All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.
All parts are at least commercial temperature range of 0°C to +70°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.
Key Features
-
AMD Artix™ 7 XC7A200T-2FBG484C
-
Rugged for high shock resistance and high vibration
-
32 MByte (256 Mbit) Quad-SPI Flash memory
-
4 GTP (high-performance transceiver) lanes
-
GTP (high-performance transceiver) clock input
-
1 GByte (32-bit) DDR3 SDRAM
-
10/100 Mbit Ethernet PHY in RMII Mode
-
MAC address EEPROM
-
Programmable Low Jitter PLL (Silicon Labs Si5338)
-
On-board high-efficiency DC-DC converters
-
12 A x 1.0V power rail
-
1.5 A x 1.8V power rail
-
1.5 A x 1.5V power rail
-
Supply voltages: either 3.3V or 3.3V and 5V
-
Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (low profile 2.5 mm)
-
158 FPGA I/O’s (78 differential pairs) available on board-to-board connectors
-
System management and power sequencing
-
eFUSE bit-stream encryption
-
AES bit-stream encryption
-
Two User configurable LEDs
-
Evenly spread supply pins for good signal integrity
Other assembly options for cost or performance optimization plus high volume prices available on request.
Recommended Software
Vivado Standard Edition (free version)
The Vivado Standard Edition is the FREE version of the Vivado design suite. Vivado Standard delivers instant access to some basic Vivado features and functionality at no cost.
Overview Vivado Standard and Enterprise Edition
Development Support
There are different base boards available for this module.
Latest documentation, design support files and reference designs with source files are available for download free of charge.
Scope of Delivery
- 1 x TE0712-03-82C36-L Trenz Electronic 4 x 5 cm FPGA module with AMD Artix™ 7 200T, low profile
- as shown, without spacer bolts and screws -
Additional Information
- Manufacturer’s article number: TE0712-03-82C36-L
- Trenz Electronic TE0712 Wiki
Samtec LSHM Razor Beam, High-Speed Hermaphroditic Terminal/Socket Strips, low profile 2.5 mm, information concerning mating heights: Wiki, mounted on every 4 x 5 cm module from us marked with "LP" or "low profile".
*All *modules produced by Trenz Electronic are developed and manufactured in Germany.
The online pictures of this product are not a legally binding offer, but are symbol pictures for illustration and presentation only.