ssh blikvm@BLIKVM_IP

sudo apt update
sudo apt upgrade
sudo systemctl disable --now kvmd-hid kvmd-janus.service kvmd-video.service kvmd-web.service
sudo reboot

ssh blikvm@BLIKVM_IP

sudo apt install -y git vim make python3-dev gcc
git clone https://github.com/srepac/kvmd-armbian.git
cd kvmd-armbian
sudo ./install.sh
sudo reboot

ssh blikvm@BLIKVM_IP

cd kvmd-armbian
sudo ./install.sh

Bli-PiKVM

Install Pi-KVM on BliKVM v4 Allwinner.

Disable BliKVM services

ssh blikvm@BLIKVM_IP

sudo apt update
sudo apt upgrade
sudo systemctl disable --now kvmd-hid kvmd-janus.service kvmd-video.service kvmd-web.service
sudo reboot

NOTE: kvmd-main.service is for LCD and hardware monitoring. Just leave kvmd-main.service enabled.

Install kvmd-armbian

ssh blikvm@BLIKVM_IP

sudo apt install -y git vim make python3-dev gcc
git clone https://github.com/srepac/kvmd-armbian.git
cd kvmd-armbian
sudo ./install.sh
sudo reboot

ssh blikvm@BLIKVM_IP

cd kvmd-armbian
sudo ./install.sh

Thanks to kvmd-armbian by @srepac.

Prepare MSD Partition

Create MSD Partition

Before applying the patch, you would need to resize your installation partition on the SD card using GParted and create an additional partition for the msd. Finally, you need to add a mount entry for the new partition to /etc/fstab where /dev/mmcblk0p3 matches the name of the new partition you created.

/dev/mmcblk0p3 /var/lib/kvmd/msd  ext4  nodev,nosuid,noexec,ro,errors=remount-ro,data=journal,X-kvmd.otgmsd-root=/var/lib/kvmd/msd,X-kvmd.otgmsd-user=kvmd  0 0

Apply kvmd MSD Patch

1. Download the msd patch and apply it.

cd /usr/lib/python3/dist-packages/kvmd
sudo wget -q https://github.com/RainCat1998/Bli-PiKVM/raw/main/3.291msd.patch -O 3.291msd.patch
sudo patch -p1 < 3.291msd.patch

1. Remove the following entries from /etc/kvmd/override.yaml.

msd:
type: disabled

1. Reboot & Enjoy

NOTE: This patch is only for kvmd 3.291.

The patch code is ported from fruity-pikvm by @jacobbar.

Configure ATX Controller

1. Download the latest BliKVM Source and compile kvmd-atx

git clone https://github.com/ThomasVon2021/blikvm
cd blikvm/package/kvmd-atx
make

1. Copy the compiled atx binary into /usr/bin/ then add sudo premission

sudo cp atx /usr/bin/
sudo nano /etc/sudoers.d/kvmd

kvmd ALL=(ALL) NOPASSWD: ALL

1. Create the following /etc/kvmd/override.d/atx.yaml file

kvmd:
gpio:
drivers:
power_short:
type: cmd
cmd: [/usr/bin/sudo, /usr/bin/atx, --v, v4, --c, power_on]
power_long:
type: cmd
cmd: [/usr/bin/sudo, /usr/bin/atx, --v, v4, --c, power_off]
reset_sw:
type: cmd
cmd: [/usr/bin/sudo, /usr/bin/atx, --v, v4, --c, power_reset]

scheme:
on-off-button:
driver: power_short
pin: 0
mode: output
switch: false
force-off-button:
driver: power_long
pin: 0
mode: output
switch: false
reset-button:
driver: reset_sw
pin: 0
mode: output
switch: false

view:
table:
- []
- ["#ATX on BliKVM hardware"]
- []
- ["on-off-button|On/Off", "force-off-button|Force Off", "reset-button|Reset"]

1. Reboot & Enjoy

Thanks to @srepac.