Schematic illustration of signal generation at the hot spot in a three-layer CB-KID. Credit: AIP Advances (2025). DOI: 10.1063/5.0292145
A research team from Osaka Metropolitan University proposed using a current-biased kinetic inductance detector with submicron 400 megapixels to image hot spots induced by a localized external stimulus over a 15 × 15 mm2 area. The team utilized a delay-line technique to trace the propagation of internal signals for a pair of signals arising from each hot spot.…
Schematic illustration of signal generation at the hot spot in a three-layer CB-KID. Credit: AIP Advances (2025). DOI: 10.1063/5.0292145
A research team from Osaka Metropolitan University proposed using a current-biased kinetic inductance detector with submicron 400 megapixels to image hot spots induced by a localized external stimulus over a 15 × 15 mm2 area. The team utilized a delay-line technique to trace the propagation of internal signals for a pair of signals arising from each hot spot.
Further, they used the timestamps of signal arrivals at the electrodes to determine the position of each hot spot (x, y). Because the signal velocity inside the detector is ultrafast at about 20% the speed of light, a readout circuit with a temporal resolution faster than 250 ps is necessary to resolve the position of a hot spot with a precision of 1.5 μm, which is the size of a meander pitch.
The research is published in the journal AIP Advances.
In the researchers’ earlier work, they developed a 1-ns CB-KID readout circuit, but it was not fast enough to resolve each segment as a unit tick step of the hot-spot position.
In this work, they developed a new Kalliope-II readout circuit equipped with a front-end main circuit for a continuous readout data acquisition system (AMANEQ) and a high-resolution time-to-digital converter that works at a temporal resolution of 30 ps. This allowed them to resolve images with smaller pixels down to 1.5 × 1.5 μm2.
Therefore, the CB-KID sensor can detect various stimuli, such as photons and neutrons. As a superconducting detector, the CB-KID realized a 100,000,000-pixel camera with a 15 × 15 mm2 sensitive area.
Occasionally, the size of the hot spot in the CB-KID is larger than the meander pitch, enabling one to determine the center-of-gravity position of the hot spots in units of half pitch (0.75 μm). This could enable a superconducting camera with up to 400,000,000 submicron pixels over a 15 × 15 mm2 area.
This development could open up great possibilities when CB-KID is applied to photonic measurements.
More information: Takekazu Ishida et al, 400-million-pixel superconducting delay-line camera with 30-ps readout circuit, AIP Advances (2025). DOI: 10.1063/5.0292145
Citation: Superconducting detector captures hot spots with submicron resolution (2026, January 9) retrieved 9 January 2026 from https://phys.org/news/2026-01-superconducting-detector-captures-hot-submicron.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.