Condensed Matter > Materials Science
arXiv:2510.27464 (cond-mat)
Abstract:The dependence of transformation pattern in superelastic NiTi tubes on tube outer diameter D and wall-thickness t is investigated through quasi-static uniaxial tension and large-rotation bending experiments. The evolution of outer-surface strain fields is synchronized with global stress-strain and moment-curvature responses using a multi-magnification, high-resolution stereo digital image correlation system at 0.5-2x magnifications. The transformation patterns exhibit systematic size-dependent behaviors. Under tension and for a specific D, as the diameter-to-thickness ratio D/t decreases, a de…
Condensed Matter > Materials Science
arXiv:2510.27464 (cond-mat)
Abstract:The dependence of transformation pattern in superelastic NiTi tubes on tube outer diameter D and wall-thickness t is investigated through quasi-static uniaxial tension and large-rotation bending experiments. The evolution of outer-surface strain fields is synchronized with global stress-strain and moment-curvature responses using a multi-magnification, high-resolution stereo digital image correlation system at 0.5-2x magnifications. The transformation patterns exhibit systematic size-dependent behaviors. Under tension and for a specific D, as the diameter-to-thickness ratio D/t decreases, a decreasing number of fat/diffuse helical bands emerge, in contrast to sharp/slim bands in thin tubes. Consequently, the austenite-martensite front morphology transitions from finely-fingered to coarsely-fingered with decreasing D/t. Below a characteristic D/t, front morphology no longer exhibits patterning and phase transformation proceeds via propagation of a finger-less front. Moreover, the transformation pattern exhibits an interrelation between D and D/t, where a front possessing diffuse fingers is observed in a thin but small tube. Under bending, both the global moment-curvature response and transformation pattern exhibit D- and D/t-dependence. While wedge-like martensite domains consistently form across all tube sizes, their growth is noticeably limited in smaller and thicker tubes due to geometrical constraints. A gradient-enhanced model of superelasticity is employed to analyze the distinct transformation patterns observed in tubes of various dimensions. The size-dependent behavior is explained based on the competition between bulk and interfacial energies, and the energetic cost of accommodating martensite fingers. By leveraging an axisymmetric tube configuration as a reference energy state, the extra energy associated with the formation of fingers is quantified.
| Subjects: | Materials Science (cond-mat.mtrl-sci) |
| Cite as: | arXiv:2510.27464 [cond-mat.mtrl-sci] |
| (or arXiv:2510.27464v1 [cond-mat.mtrl-sci] for this version) | |
| https://doi.org/10.48550/arXiv.2510.27464 arXiv-issued DOI via DataCite |
Submission history
From: Stanislaw Stupkiewicz [view email] [v1] Fri, 31 Oct 2025 13:25:24 UTC (21,243 KB)