HOW TO USE
GUIDE
USING YOUR CONTROLLER
THE BASICS
ATTACH YOUR PHONE
Set your MagSafe phone or case onto MCON and let the magnets do the work. If your phone feels loose, turn it 180 degrees.
Don’t have MagSafe? Scroll down to the ANDROID INSTALL tab.
**CENTER YOUR SCREEN **
If your screen is off center, remove your phone and slide the magnetic mount left or right. This adjustment is only personal preference.
PRESS THE BIG BUTTON
Firmly grip your MCON and press the Quick Launch button. Be wary of tilting the controller downward when activating MCON, as gravity combined with the spring force can eject your device.
YOU’RE READY TO GAME.
MCON slides into action! MCON can now be powered on - it automatically sleeps when closed.
ACTIVATE THE HANDLES
Grab the handles near the triggers for the best leverage, then pull straight down - not inward. The handles pivot from the USB-C side of the controller.
EJECT & KICKSTAND
HOLD EJECT AND PULL COVER
To eject, press and hold the eject button and pull the cover straight out.
PULL THE KICKSTAND UNTIL IT LOCKS
The kickstand will lock into the optimal position. Reattach your phone if necessary. You’re ready to game on any tabletop.
TO REINSERT, CLOSE KICKSTAND
Click the kickstand back into it’s closed position.
SLOT KICKSTAND BACK IN
Slide the kickstand back into the body of the controller. If the cover is floppy - do not force it closed. Eject the cover and restart the process. Ensure the kickstand stays fully closed when you are reinserting it.
WIRELESS PAIRING
SLIDE POWER SWITCH ON
Your controller is ON or in SLEEP when you can see GREEN.
OPEN CONTROLLER TO TURN ON
When closed, MCON automatically sleeps to save battery.** **Press the Quick Launch button to slide your controller open. Now your controller is ON.
HOLD PAIR UNTIL LIGHT RAPIDLY FLASHES
Hold the pair for 3 seconds, or until the bottom LED starts flashing rapidly blue.
MULTI PAIR
Title
DOUBLE TAP PAIR TO SWITCH PAIR SLOT
When you double tap the pair button, MCON will switch to a different pair slot. This swap takes about 2 seconds. The blue LED will then flash the number of times corresponding to the pair slot.
THE NUMBER CORRESPONDS TO MCON’S PAIR SLOT
MCON will appear in your device’s Bluetooth settings with the pair slot number. For example: OHSNAP MCON I, OHSNAP MCON II, and OHSNAP MCON III.
ANDROID INSTALL
WE RECOMMEND USING A MAGSAFE CASE WHEN POSSIBLE.
These are available for almost all Android phones and ensure better experience with MCON and wireless chargers.
REMOVE ADAPTER LINING
Grab the MagSafe adapter ring from your box and remove the adhesive liner.
APPLY TO CENTER OF YOUR PHONE
Place the adapter as close to the center of the back of your phone as possible, both vertically and horizontally. The further off center, the worse wireless charging performance will be.** Let the adhesive cure for 24 hours before attaching MCON.**
PRO CONTROLS & MODES
INPUT MODES & BUTTON SETTINGS
MODE
HOLD UNTIL LIGHT FLASHES
**2.4GHz MODE **(DOCK & KEYCAST)
X-INPUT (DEFAULT)
**D-INPUT **(ANDROID LEGACY & LINUX)
**DS4 INPUT **(Unofficial Playstation)
**NS INPUT **(Unofficial Nintendo Switch)
**SWAP A-B & X-Y **(XBOX TO NINTENDO STYLE)
JOYSTICK & TRIGGER SETTINGS
JOYSTICK DEADZONES: ON / OFF
To activate: press buttons simultaneously
Deadzone off: LED blinks 2x blue
Deadzone on (default): LED blinks 2x green
TRIGGERS: ANALOG / DIGITAL To activate: **Hold view + the trigger you want to activate for 2 seconds **
Digital Trigger: LED blinks 2x red Analog Trigger (default): LED blinks 2x green
GYROSCOPE SETTINGS
MAP GYRO TO LEFT JOYSTICK (RACING)
To activate: Hold both buttons for 2 seconds.
Gyro Mode Active (non-default): LED blinks 2x Red
Joystick Mode (default): LED blinks 2x Green
MAP GYRO TO RIGHT JOYSTICK (AIMING)
To activate: Hold both buttons for 2 seconds.
Gyro Mode Active (non-default): LED blinks 2x Red
Joystick Mode (default): LED blinks 2x Green
OTHER CONTROLLER SHORTCUTS
ADJUST LED BRIGHTNESS
Cycle between bright & dim modes
To activate: press buttons simultaneously
CALIBRATION & RESET
FACTORY RESET
RESET CONTROLS & MAPPINGS
Resets the controller without erasing paired devices.
To activate: Hold buttons for 5 seconds, LED flashes 2x green.
FACTORY RESET
Erases all controller settings and paired devices.
To activate: Hold buttons for 5 seconds, LED blinks 3x green.
RECALIBRATE JOYSTICKS & TRIGGERS
TO RECALIBRATE:
1. Hold button shortcut for 2 seconds, LED will slowly flash white.
**2. **Fully rotate joysticks 2-3 times at their max range.
**3. **Slowly press the triggers 2-3 times from fully depressed to fully pressed.
**4. **Press A to finish. White LED will turn off.
RECALIBRATE GYROSCOPE
TO RECALIBRATE:
1. Place controller on a flat surface.
2. Hold button shortcut for 2 seconds, bottom LED will flash red and blue.
**3. **Bottom LED returns to normal when complete
FAQs
My power switch is "on" but the LEDs aren’t on?
When closed, MCON automatically sleeps to save battery.** **Press the Quick Launch button to slide your controller open. Now your controller is ON. MCON will also automatically sleep after 3 minutes, press A/B/X/Y/Home to wake it.
How do I know how much charge my MCON has?
The Top LED is always on to indicate power: Flashing Red: 0 - 4% Red: 5 - 20% Orange: 21 - 49% Green: 50 - 100%
How do I know if my MCON is charging?
The Top LED will breath **RED **when charging and turn **GREEN **when fully charged.
How do I wake my controller?
If your controller is open but the LEDs are off, press A/B/X/Y or Home to wake your controller.
What are the polling rates in different modes?
- Bluetooth Mode: ≥120hz
- 2.4Ghz Mode: ≥250hz
- Wired Mode: ≥1000hz on PC, ≥250Hz on Android